Highly efficient deep concentrated cleaner for extra-ordinary maintenance, with CO2 fully offset in the entire life cycle.

Concentrated high performing professional detergent to remove organic dirt and to undertake a deep clean of surfaces. It is also effective as wax remover for water-based and metal-flake waxes

ADVANTAGES:

High performance

Contact time (5 minutes)

Rotating cleaning machine

Biodegradability

Highly effective degreaser

Highly efficient deep cleaner for extra-ordinary maintenance

Perfect to clean surfaces for tile-on-tile installations

Can be used to remove water based metalized waxes

APPLICATION METHOD

Use UltraCare HD Cleaner undiluted to remove stains from porcelain tiles. Apply to the stain and the whole area of the tile and leave to act until completely dried (about one hour at +23°C and 50% relative humidity). Then proceed to wash with water and then rinse. The use of an abrasive sponge such as a white Scotch-Brite pad may be used during washing.

Use UltraCare HD Cleaner diluted with water in ratio from 1 :10 to 1 : 20 for deep cleaning of surfaces. Apply the diluted solution to the surface and leave to act for 5-10 minutes and then work over the surface with a single-disc cleaning machine or with an emulsifying pad. Remove the solution and then rinse with plenty of clean water.

 In case of stubborn dirt or grease, UltraCare HD Cleaner can be diluted with water in a ratio of 1 : 5 in order to increase the concentration.

You may also repeat the process if dirt remains. Always remove the solution and ensure that the surface is rinsed with plenty of clean water.

UltraCare HD Cleaner can be used diluted 1 : 5 to remove wax finish treatment either water-based and waxes, to either remove them completely or to prepare the surface for reapplication.

Apply the solution to the surfaces of intervention and let it act for 5-10 minutes. Then proceed to cleaning with single-disc cleaning machine or pad. Rinse with clean water. If necessary, repeat the intervention.

RECOMMENDATIONS

▪ Never use UltraCare HD Cleaner on waxed surfaces, unless to remove their treatment, or surfaces treated with products that are not resistant to wax removing detergents. In case of doubt, carry out a preliminary test in an Inconspicuous area. 

▪ Undertake a test when using on PVC, rubber and linoleum to check their compatibility with the colour and surface finish. Can damage methacrylate surface 

▪ Do not use on wood or polished stone.

▪ When using UltraCare HD Cleaner we advise to wear rubber gloves.

▪ UltraCare HD Cleaner does not damage metal or galvanized surfaces; however, given the variety of materials available on the market, a preliminary test at different concentrations is always recommended.